Equipment and system pumps for fuels and engine oils

EQUIPMENT® and system pumps

Tank Equipment and pumps for fuels and engine oils

Hand wing pump

Manual vane type pumps can be used for clear liquids such as water, petrol, diesel fuel and other fuels as well as for paraffin, alcohol, light chemical solutions, edible oils, etc. They are the only manual pump type which can handle very hot liquids up to 80°C.

hand wing pump Krampitz

Centrifugal pump

The centrifugal pump is recommended for diesel fuel/fuel oil as well as thin-bodied media which do not attack the materials of the pump chemically. The PK-80 pump is a compact self-priming pump used to convey scanty, irregular liquid fl ows or media mixed with air.

centrifugal pump Krampitz

Jet centrifugal pump

The jet centrifugal pump is recommended for thin-bodied media such as EL fuel oil, diesel fuel, clean water and liquids which do not attack the materials of the pump chemically. The design of this self-priming pump is such that the medium can also be taken in when it is mixed with air. A high level of reliability and freedom from maintenance make the pump suitable for industrial applications, e.g., systems which are supplied with fuel.

Jet centrifugal pump Krampitz

Radial centrifugal pump

The radial centrifugal pump is recommended for thin-bodied media such as EL fuel oil, diesel fuel, clean water and liquids which do not attack the materials of the pump chemically. The design of this self-priming pump is such that the medium can also be taken in when it is mixed with air. A high level of reliability and freedom from maintenance make the pump suitable for industrial applications, e.g., for systems which are supplied with fuel.

Radial centrifugal pump Krampitz

Sliding vane pump

The small, compact and very silent pump is suitable for thin-bodied media, e.g., fuel oil EL and diesel fuel. The high priming power makes the pump ideal where a certain volume of liquid must be made available intermittently but quickly. The pump delivers fairly high volumes also at pressure.

Sliding vane pump Krampitz

Gerotor pump

Gerotor pumps can be used for conveying liquid media which have some lubrication effect and do not contain solid contamination. The compact block design without coupling saves a signifi cant amount of construction length. To protect the electric motor from overload, a by-pass valve with 1-15 bar opening pressure is integrated in every pump.

Gerotor pump Krampitz

Geared pump

Geared pumps are suitable especially for conveying media of high viscosity which do not contain solid material, ensure a minimum of lubrication and are compatible chemically. The standard version has clockwise rotation. The rotation of the gears can be reversed simply by turning of the pump housing by 180 degrees. This also changes the direction of flow.

Geared pump Krampitz

Pump combination

The pump combination type Z-PK comprises of a manual vane-type pump and a centrifugal pump in a housing designed especially for stand-by diesel generating sets. The main feature of the combination is the common pump body in which the electric centrifugal pump and the manual vane-type pump are installed. The pump-combination is protected by utility.

Pump combination Krampitz

Block pump set

The block pump set type Z-PG was developed specifi cally for the requirements of oil change and oil supply of industrial internal combustion engines. The target of the development of this pump was a compact design which integrated a maximum number of functions and valves in the pump housing.

Block pump set Krampitz

Level sensor

The flexible level sensor AE-100-E is a float switch for filling levels, and it works according to the proved and tested principle of the reed switch contact. We have been using this high-quality level sensor AE-100-E for more than 10 years. It performs its tasks on every continent, no matter in great heat in Africa or great coldness at Arctic research station.

Level sensor Krampitz