Generator belly tanks – the KTD-FL tank series
KTD-FL-Mini – the mini bellys
The new KTD-FL-Mini tank series (Krampitz Flunder) are designed for direct mounting of diesel generators on the roof of the tank body. The load capacity of the outer steel skeleton is designed for 3000 kg.
These tanks are designed as double-walled steel bodies with electronic vacuum leakage monitoring.
They are equipped for installation in machine containers or in buildings, i.e. for indoor installation.
Two solid C-rail sections are welded in longitudinal direction on the tank roof. Up to three freely adjustable load-bearing top-hat sections are attached to these C-rails (four top-hat sections are available as an option).
The complete GenSet carriage or diesel engine with generator can be mounted on these top-hat profiles using intermediate adapters provided by the customer.
To fix the complete unit to the container floor, fastening brackets can be mounted on special multifix points (welded into the corner posts) in the floor area.
A DN600 dome entry in the tank roof guarantees good access to the tank interior for service and cleaning.
Connection sleeves in the tank roof ensure that the tank is equipped with level indicators, electrical switch points, overfill protection, the filling connection, venting connections, and suction and return pipes.
Lifting lugs on the tank roof allow good handling of the tank with a crane.
The KTD-FL mini bellys are divided into the 3 sub-series A, B, C
The KTD-FL-A series represents the smallest group with 4 variants. These have a footprint of 1,200 mm x 2,500 mm with volumes from 500 to 2,000 liters.
The KTD-FL-B series, the medium group, also offers 4 variants, which are available with a footprint of 2,000 mm x 3,000 mm, overall heights from 500 to 1,250 mm and tank volumes from 1,000 to 5,000 liters.
The KTD-FL-C series is the large group with 4 variants. It has a footprint of 2,000 mm x 5,750 mm and overall heights of 500 to 1,250 mm. The volumes range from 2,500 to 10,000 liters.