Chemical waste tank container
Krampitz Chemical Waste Collector KCWC-20000
Automatic chemical collector for liquid chemical media
Automatic chemical collectors for liquid chemical media (waste) are used for automatic Collecting and temporarily storing process media to be discharged from fully automatic industrial systems.
Disposal of chemical waste
Here are the Media to be disposed of (liquid chemical hazardous waste) is collected and vacuumed and transported away by disposal companies using special tank trucks.
Double-walled stainless steel tank for liquid chemical hazardous waste
This one shown here Chemical collector has a capacity of over 20.000 liters.
He's completely out Stainless Steel in 1.4571 as double-walled tank Manufactured with vacuum leak monitoring.
The control cabinets located at the front contain the fully automatic control and monitoring of all components of the collection tank in the right cabinet. The electronic one is in the left control cabinet Vacuum leak detector Installed.
Tank truck coupling
The 2" suction nozzle with motorized ball valve is also located here Tank truck coupling for the tanker truck.
Flush connection for tank cleaning
There is also a 2" water flushing pipe with motorized ball valve and Connection coupling type Storz for flushing the tank installed with rinse water for tank cleaning.
This Flush connection supplies two permanently installed flushing lances inside the tank with cleaning water. These flushing lances are positioned to flush the chemical residue and any solids to the tanker's suction pipe.
Agitators on the tank roof
Two Agitators installed in the roof prevent the formation of sediment from the media to be temporarily stored on the bottom of the tank.
Heating register pre-installed
A heating register made of stainless steel pipe is installed in the tank roof and can be pulled out. This heating register is intended to prevent the chemical solutions from freezing in the cold season. The heating register is fed with hot water from the industrial plant.
Electronic content display
A electronic content display in the tank roof signals the fill level in the tank room for the system control. Appropriate switching points are set here for all work processes, such as storage, suction, cleaning and stirring.
Electronic overfill protection
A electronic overfill protection Safely prevents any overfilling of the tank.
The filling nozzle for the disposal medium installed on the tank roof is equipped with a motorized ball valve Reaching the maximum filling level in the tank Automatically the material moisture meter shows you the inflow from the production facility interrupt. At the same time, the system control automatically issues signals to switch off the delivery pumps for the disposal medium in the production system. In addition, this important signal is passed on to the control unit of the production plant.
All work processes can be switched and monitored from here. All alarm messages are passed on to the higher-level switching system.
Hood element on the tank roof
A Hood element on the tank roof Securely closes the sensors installed in it, such as overfill protection and content display. The cathedral entrance for maintenance work is also positioned here.
A circulating one Safety railings made of aluminum tube protects employees from falling during installation and maintenance work on the tank roof.
Control Cabinets
The robust base of the tank supports and protects it two control cabinets on the front wall.
And finally ...
The chemical collector type KCWC 20.000 provides one state-of-the-art solution for automatic process systems in container design.
It's all of them WHG requirements taken into account and enables fully automatic operation of the entire system.
The notification to the waste disposal company can also be made automatically if the filling level is appropriate.
Furthermore, the control can control the number of Disposal operations as well as the one that was disposed of Quantity per disposal process through the electronic content display document.
The Krampitz “Chemical Waste Collector” realizes full control and monitoring of disposal processes for liquid media in modern production plants.