Technical requirements according to the 44th Federal Immission Control Ordinance (BImSchV) - Tank systems & tank containers manufacturers

Technical requirements for energy generation plants such as NEA and CHP through the 44th BImSchV

The installation conditions for manufacturers and operators of energy generation plants are becoming increasingly complex and difficult.

44. BImSchV – Federal Immission Control Act
(Ordinance on medium-sized combustion, gas turbine and internal combustion engine systems)

Engines with a combustion heat output (FWL) of over 1 MW must comply with the stricter NOx exhaust gas values in accordance with the 44th BImSchV coming into force on June 01.06.2019, XNUMX.

The required 500 mg NOx can usually only be achieved through the use of SCR-KAT systems and urea.

Are common CHP operators / engine operators / operators of stationary energy systems overwhelmed with the requirements for technical implementation and therefore rely on the experience of professional providers established on the market.

Krampitz has been active in this market for over 30 years.

We manufacture storage tanks as well as tank containers of 50 liters. up to 100.000 liters Volume, in and double-walled construction in steel and stainless steel.
These tanks and containers contribute Test mark from the German Institute for Structural Engineering, for media such as diesel, heating oil, gasoline, mineral oils and urea solutions.
You can receive these products as an approved tank or container, or alternatively as a complete module with extensive equipment.
For example one Urea container with built-in SCR catalytic converter, as well as the exhaust system built on the container.
With our statics we enable the production of extremely resilient, as well as space-saving Section modules.
Of course, this also includes automatic ones Lubricating oil supply systems for combustion engines has been part of our manufacturing portfolio for many years.

Krampitz offers professional supply systems Turnkey storage tank and container solutions for urea, motor oils and fuels, which solve the legal requirements placed on you, such as WHG and 44. BImSchV, simply, easily and in a space-saving manner.

Storage tanks for earthquake-prone (EBZ3) and flood-prone areas

Since last year, in addition to urea tanks, we also have tank product lines for earthquake-prone areas – EBZ3 – , also for flood-prone areas in program. For example, see the following link double-walled storage tanks.

Release for the media, among other things Urea, diesel, lubricating oil, waste oil, heavy oil, gasoline.
Suitable for indoor or outdoor installation.

Foundation tanks (belly tanks)

In the Foundation tanks (belly tanks) we work on stacking loads of up to 80 t load capacity. Belly tanks are units that carry entire machine systems on the tank roof.

With our know-how, we are happy to support your planning and give you investment security.
Work competently with us right from the start. We are your professional partner for these tasks.